EVA Solar Cell Encapsulation Film Line Poe Cell Film Production Machine 1. Specification of single-extruder production line: Extruder type GWS160 GWS160 GWS180 GWS180 raw material EVA ,POE EVA ,POE EVA ,POE EVA,POE Product width 2200mm, 2400mm, 2600mm Product thickness 0.2mm -1mm 0.2mm -1mm 0.2mm -1mm 0.2mm -1mm Maximum linear speed 10m/min ,12m/min,15m/mn 2. Specification of co-extrusion production line...

...adhesive film,no viscous and with anti-adhesive at normal temperature,under certain conditions laminate occurred melt adhesives and cross linked curing. It is a novel thermosetting hot melt adhesive film. EVA film Usage: It is used for the encapsulation of

...EVA Solar Cellpanel Packaging Film Manufacturing Line Product Description: The Cast Film Extrusion Machine is an advanced film production line for producing Solar Cell Packaging Film, which is designed to ensure the shrinkage rate is less than 3%. It is equipped with a 180mm screw diameter, 380V/50Hz power supply, and 2400-2800mm film...

...Solar cell module,Solar cell module equipment,EVA cut + flat Equipment composition and introduction: This section of equipment is used in CdTe, CIGS and other thin-film solar cell substrates and backplane packaging lines, including substrate insulation adhesive patching, bus bar patching, drainage strip patching, sealant patching, EVA four-sided cutting punching and cover back plate, the whole line...

Melt Point 45-75℃ EVA Hot Melt Adhesive Film For PE material and EVA products and Solar Cell Encapsulation and clothing Product Description: This product is a thermoplastic adhesive. It can be reheated and plasticized and apply for a variety of materials...

...Film for Cold Extrusion Roll Flute Paper Thermal Film Sheet Hot Press Dry Solar Module Production Line Solar Module Lamination Machine Product Description It mainly operates based on the principle of hot-pressing technology. Multiple layers of materials such as laid-out photovoltaic cells, glass, backsheets, and encapsulation films...